Aluminum blanks

[D&LItems]

Does anyone know of a supplier of Red aluminum .040 blanks in Calif. or at least on the West coast? I have found red on one side and white on the other, but not red on both sides. Right now I get it from the east coast, but the shipping is costly. Thanks for any help.

Daniel

 

[gnatt66]

any race car fab shop should have red .040 in stock and a stomp shear, might wanna check that route.

most any chassis builder has atleast 4-5 colors of wrisco alum in stock.

 

[J Hill Designs]

blanks or sheets? have you tried denco/montroy/pac sign/cal sign?

 

[D&LItems]

Will check with car shop. Denco only has white. Sheets or blanks will work, can cut them down to size. Will look into the other companies. Thanks

 

[Si Allen]

Try Blinkety Blanks in Stanton, Ca


www.blinketyblanks.com/

 

[J Hill Designs]

that place states that they have "prepainted white blanks"

 

[cartoad]

Check back with Denco, they will cut to size from blanks. Just went thru this, and they were the only ones we found.

 

[Patrick's Sign Compa]

Sign Mart in Orange?

 

[ProWraps]

+1 for denco. they service our printers and are pretty fair with their prices. just consider 8x4 sheets and do your math accordingly so that you dont end up with a bunch of scrap pieces like we did on our first go around (we just blanket ordered sizes without optimzing the sheet capacity).

 

[D&LItems]

Registered with Sign Mart. Will check back there later for prices. Thanks