Aluminum or Steel Sign Blanks

[old racer]

Who offers the best wholesale pricing for aluminum or steel sign blanks. We have 12-15 signs to make which will be placed in rock quarries. These signs will range in size from 12"x24" to 18"x24", and will have single layer vinyl graphics applied to them. Any suggestions certainly appreciated.

 

[cgsigns_jamie]

I'm not sure why you'd use steel but...

Grimco sells aluminum banks at very decent prices.

 

[southpawP8NTR]

At those quantities and sizes most suppliers will be fairly close in price.

 

[Mosh]

+ on grimco. They deliver to me on Wednesdays for FREE! can't beat that!

 

[jscarl]

What will the substrate be made of.?? The steel would rust and bleed onto it. Alum would be better if you can cover the extra cost.

 

[Mosh]

Oh, Aluminum. We do signs for rock quarries in the "limestone capitol of the world" Weeping Water, Nebraska. Aluminum. You might ask, but we do alot of them in reflective cause they run alot of night shifts.

 

[petrosgraphics]

not sure on the thickness of the material you will want to use..

.063 would be nice... grimco is fine, you can order a 4x8 sheet
have them cut to size, you must have a customer, plumber, sheetmetal
guy that could cut them for you...you would save a bit on material cost..

 

[mrchips]

Here's another option if you are interested........

http://www.americanfibertech.com/webpages/index.asp

Joe,

Makin Chip$ and Havin Fun!

 

[MCFT]

You can also try:

You can also try:
http://www.xxx.xxxx.com

 

[Fred Weiss]

You can also try:
www.xxx.xxxx.com

Your post is self-promotional and is not permitted unless you first purchase a Merchant subscription. Here's a link to more information about a subscription. If you have any questions, feel free to PM me.

 

[Pat Whatley]

I'd personally use .080 aluminum and in the quantity you're looking for I'd call whatever supplier was delivering next. I could shop that through all three of my aluminum suppliers and the prices for the whole lot would be less than $5 apart....just not enough to worry about.

The Fiberbrite panels Mr. Chips mentioned are AWESOME as well. They actually take more of a beating than aluminum or steel will and letter beautifully.