atv & utv wraps

[balzdep]

looking for a wholesale large format printer who prints and laminates using convex to be used on atvs & side by sides.

Was thinking about buying my own setup, but after reading posts here not sure i want to inhale all the chems. I need to keep the few brain cells i have not killed yet...lol

 

[TresL]

Let me know what all your looking, we drop ship for lots of guys.

But use, Substance Material 99% of the time

 

[Flame]

Probably need to do a little more research. Eco sol and Latex machines put off little to no fumes so it's not much of a concern. Also just fyi outsourcing prints for MX and ATV bikes rarely goes far. Just not enough profit margin. It's a very tough industry to make $$ at, you just have to play your cards right.

Best of luck to ya!

 

[mudmedia]

I did not want to stock substance so I outsourced all our mx graphics. Eventually I stopped offering them as making $15-20 a kit was not worth the hassle. I let the guys that specialize in motocross graphics do it and refer my clients their way.

 

[Vital Designs]

Probably need to do a little more research. Eco sol and Latex machines put off little to no fumes so it's not much of a concern. Also just fyi outsourcing prints for MX and ATV bikes rarely goes far. Just not enough profit margin. It's a very tough industry to make $$ at, you just have to play your cards right.

Best of luck to ya!

I totally agree, except for the UTV (Side X Side) market. They will spend whatever it takes. I have 2 on display in my showroom.

 

[balzdep]

The Side x Side market is mainly what i am shooting for. They spend tons of cash upgrading their machines. Its not uncommon for them to have more in upgrades then it cost new. Figure a grand or so on a custom wrap is a drop in the bucket to most of them.

 

[dortonracing]

hit me up i can probably help you out.

 

[Mosh]

I googled up graphics for side by sides, they are cheaper than I could print them myself for. I use my 1976 bronco, all my neighbors have the razors and gators...my bronco will go anywhere those things can and I can drive it into town leagaly.

 

[balzdep]

wow your saying you cant print them for $350....I must be missing something either the material cost i figured or the amount of sq.ft needed must be way off in my projections. ( i am not doubting you, as you are in the large format field )
Feels like i am pissing into the wind here....lol
Maybe its time to mark this off my list & move on. If there is no money in it, then no need to waste anymore time

 

[Vital Designs]

There is money in it but you need to offer set designs. Fully customizing each one will eat you up.
I am working on a "build" right now that is completely custom. The photo shoot is Tuesday (For ATV magazine). It is a PIA and I have to finish it by the AM. I am not charging for it but I couldn't charge enough for my time ( for a real customer).

As said, the Side x Side market is huge and growing exponentially. ATV sales are on the other end of the spectrum.