Avery® SF 100 Conform Chrome

[wes70]

I have a customer wanting chrome lettering and graphics on his truck. I'm curious how this chrome vinyl cuts on the plotter?

 

[ikarasu]

We've cut some lightning bolt shapes out of it and it worked fine, the material does tend to tunnel. I probably won't cut anything under two to three inches on it, otherwise it should be fine

 

[wes70]

We've cut some lightning bolt shapes out of it and it worked fine, the material does tend to tunnel. I probably won't cut anything under two to three inches on it, otherwise it should be fine

Ok thanks...client insists on chrome and I'm staying away from the metallized films! The cut vinyl lettering would only be a couple inches high.

 

[jfiscus]

We have cut the Avery Chrome Wrap Vinyl for customer vehicle lettering. It does last well. No issues cutting it on our old Mimaki plotters at that time.

 

[wes70]

We have cut the Avery Chrome Wrap Vinyl for customer vehicle lettering. It does last well. No issues cutting it on our old Mimaki plotters at that time.

Thanks…that’s good to know