Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Avery 700 Metallic Gold Vinyl

Discussion in 'General Signmaking Topics' started by JLD984, Sep 19, 2013.

  1. JLD984

    JLD984 Member

    355
    0
    16
    Feb 21, 2012
    Australia
    Does anybody have any tips for lifting Avery 700 metallic gold vinyl from the backing paper? No matter how high tack the application tape is and no matter what depth I cut the vinyl, it just will not come off the backing paper. Having to use a knife to individually lift each letter which takes forever. This was never a problem until two or three years ago, the vinyl has obviously changed. Any help appreciated.
     
    Tags:
  2. J Hill Designs

    J Hill Designs Major Contributor

    15,549
    16
    0
    Sep 24, 2004
    put it in a freezer for a few

    first maybe try peeling the backing off (upside-down) instead of the fronting =)
     
  3. TammieH

    TammieH Very Active Member

    1,085
    67
    48
    Nov 28, 2011
    Pacific NW
    Use high tack transfer tape.
     
  4. AceSignsOnline

    AceSignsOnline Member

    136
    0
    0
    Apr 17, 2013
    Have you tried flipping it face-down and pulling the backing off at a sharp curl? Hell, did that even make any sense?
     
Loading...

Share This Page

 


Loading...