Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Avery MPI 2920 Peeling Issue

Discussion in 'Vinyl' started by Cmiller01, Dec 14, 2012.

  1. Cmiller01

    Cmiller01 Printer

    Jun 6, 2011
    Allentown, PA
    Hi Everyone,
    We have been having a quality issue regarding our Avery 2920 Vinyl. We have been having alot of printed items peeling off of our substrates. We use denatured alcohol to clean our substrates with. We used to use laquer thinner, lightly applied to a clean rag to quickly wipe down the substrate...and it was peeling then so we decided to switch to alcohol. This is happening on styrene, sintra, and laminates. It has become a real issue in the past few months. We print on a Mimaki Jv3 and we let our stuff dry at least 12+ hours before overlamming it. Any suggestions? We have been using laquer and plastic cleaners for years without any real problems and fear it may be the vinyl...Thanks.

Share This Page