Susan Stewart
New Member
We are having a backup generator installed at our shop. I was wondering if anyone can tell me the bare minimum power required to keep the pumps recirculating the ink on the Mimaki JFX200-2513.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Back up power for Mimaki JFX200-2513
- Thread starter Susan Stewart
- Start date
Solventinkjet
DIY Printer Fixing Guide
The main specification for input power is - Single phase, 200 V AC-240 V AC, 50 Hz/60 Hz, less than 12 A
Standby power consumption - less than 1kVA.
Max power consumption (with the UV lights on high and printing) - 1.3kVA or less.
I do not know if the machine will function at lower power levels as I have never tried so you might want to call Mimaki on that.
Standby power consumption - less than 1kVA.
Max power consumption (with the UV lights on high and printing) - 1.3kVA or less.
I do not know if the machine will function at lower power levels as I have never tried so you might want to call Mimaki on that.