• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Banding in greens/pinks 700w

V

Vector Vinyl

New Member
Vector Vinyl said:
Ran cleaning and alignment. basically perfect printing on the status chart. No clogged nozzles. Tried replacing Optimizer printhead because i saw the some bleeding too, fixed the bleeding but no change to the banding. Just showing in Pink and Green. I’m sure i should know this by now but what’s the general cause if it’s not the printheads? Or can the status chart print perfect and still have clogged nozzles not shown? Thanks in advance!
Click to expand...
Ok, so i didn’t fix it when i thought. It immediately continued the same issue. It’s fixed now but i have no idea how i did it.

After trying everything i could think of, i bought a new optimizer printhead. But when i went to install it (the optimizer ink was at 18%) the printer said there wasn’t enough ink to initialize. So i put the old one back in and it ran an alignment and then started printing perfectly. I’d run several alignments and cleanings already as stated. No idea what happened or how to fix it in the future. Still have the optimizer ink and printhead ready to use when needed. *shrugs*
 
You must log in or register to reply here.
Top