banding??

[Wraps ink]

came back to shop to see that epson gs6000 was doing some major head striking while I was gone....restared the print and it was banding so I ran a nozzle check and noticed I had some missing nozzles after several cleanings the cyan is still missing nozzles and still banding on blueish colors...anyone have a better solution? or a fix?

 

[Freese]

Could of knocked head out of alignment, or it could be because of nozzle outages.

 

[Wraps ink]

or both...but how do I get the nozzles back it seems like ive done everything i can do

 

[BPI Color]

Looks like it's time for a new head. Never, never, never leave a printer unattended.

 

[J Hill Designs]

head soak overnight - if little to no change, you might have done roont yur head

 

[Wraps ink]

yeah I have a tech coming hopefully soon I changed the wave pattern and it seems to be doing ok but at a slower speed....The tech seems to think nozzles were damaged...boy if i could have yesterday back geez!

 

[SE SignSupply]

Doubt you hurt the head on SAV. I would guess the service station needs replaced. Try putting some cleaning fluid around the caps to see if it helps the seal.

 

[tattoo.dan]

Looks like it's time for a new head. Never, never, never leave a printer unattended.

yeah, not this...

 

[ProWraps]

its a mutoh. i have one that ate itself from a head strike.

good luck bro. im in the same ball park.

you got bad nozzles. head replacement is going to be your fix. DX5, aka, the most expensive head in the biz.

let me know if you find a good deal on them. i need one as well.

 

[boxerbay]

epson has a head cleaning flush kit. part#C12C890621

 

[Wraps ink]

had the printhead replaced luckily it was warrantied, and capping station wasnt holding a seal either so that was replaced as well works great now no complaints