Black/cyan Head not firing.

[Mosh]

I just replaced my carrage cable on Friday. Machine worked great afterwards, Monday it printed fine, today NO BLACK or CYAN.
From what I read I might have a blown fuse, can someone direct me to where this fuse is located and where I can get one FAST. Thanks in Advance!

Or if there may be something different going on, or I am just going to go buy a new printer!!!

 

[Mike_Koval]

they are on the main board...im trying to find a pic that has them marked.

i think they are labeled F1 and F3 if im not mistaken

 

[Mike_Koval]

what model roland?

 

[Mosh]

sp-300v

 

[player]

If it is out, I soldered wires to go from the fuse to a holder I built so i could change the fuses easily next time. Be careful!

 

[ToasTuk]

Found this, appears to be on the main board.
hope that helps.

 

[Mike_Koval]

yep...thats the pic i was looking for. Those are the fuses..

on 300v F3 is black and cyan

 

[Mosh]

Checked the fuse with a meter and it shows OK. Any idea what to try next?

 

[Mosh]

FIXED!!!! While replacing the cable last week one on the plastic rivets broke and somehow ended up in the capping station...
after several powerful head cleanings it looks like I might be back in operation!!!!! Stumbled on it this morning....

 

[player]

Lucky!