Bleed Over on one side.

[JMSports]

1. Can some one give me an idea what might be causing this? At first I was getting this the cyan was bleeding over on this print.





2. I did a horizontal test print. The magenta was fuzzy. Long story short the had was blown. I changed the head lined very direction back up now this. Now the Magenta is bleeding over and I have lined the heads up.

Any suggestions.

 

[J Hill Designs]

I'd say you haven't aligned it correctly

 

[JMSports]

I'll check it again

I'd say you haven't aligned it correctly

I'm trying to go by the manual. I'll check it again.


Thanks

 

[Solventinkjet]

Did you run the alignments in the Service mode including the mechanical adjustments or just the user adjustments in the regular menu? If you didn't run the mechanical alignments, your electronic ones will be off no matter what.

 

[BIG EASY DOES IT]

Might also be helpful to know the printer you are using.

 

[JMSports]

Rechecked Alignment

I'm trying to go by the manual. I'll check it again.


Thanks

I rechecked the alignment. I miss one little thing. Works great. I will not miss that again. You learn by your mistakes.


Thanks guys for keeping me straight.