Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BN-20 Cleaning during print

Discussion in 'Roland' started by Creek Bank, Oct 5, 2019.

  1. Creek Bank

    Creek Bank New Member

    Jan 30, 2019
    Bigfork, MN
    Hi All,

    Checking to see if someone has some info that may help me out on this one.

    This printer has been going through a large volume of ink. I just printed 90 12" x 12" full color signs and it used a nearly full 220 cartridge or each color and the waste tank went from 15% to full. According to VW ink consumption estimator this should have taken about 240 cc of ink.

    This has been going on for a couple of months but seems to be getting worse.

    I tried switching out chips on ink cartridges and the chips I put in said I was out of those inks and they are nearly full. (the BN utility ink utility quit being close to correct about a year ago.) Print quality remains great.

    Thanks, Jeff

Share This Page