I have Flexi production manager, version 24 and installed everything on a single computer connected to a network by utp. I have a Epson 30600 installed on the network and a Mimaki CJV300-160 Plus on the same. The Epson installed correctly but it seems to have a problem finding my Mimaki. I set everything right and if i ping (cmd on computer) the mimaki it seems to find it. Also rasterlink seems to find my Mimaki so that seems to be correct. I tried to find it automaticly without any result and by entering the ip manualy, changed port to 9100, 9101, 11110 (saw that portnumber on this forum) but without any result. Anybody know whats wrong?
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Can't see my Mimaki CJV300-160 Plus on network
- Thread starter lainke
- Start date
Smoke_Jaguar
Man who touches printers inappropriately.
On the printer, go to machine setup and look for network and view the IP address from there to see if you can directly connect to it.
I can see the ip on the Mimaki and tried it manualy in Flexi but says that i must contact network admin to fix the problem. My mimaki is on the network and i know wich ip but it seems that only flexi doesn't see my Mimaki
If you JUST did a new install of windows, or a new computer, be sure network discovery is enabled.
enable file and printer sharing.
AS A TEST turn off firewall.
WHAT ANTIVIRUS IS INSTALLED?
sometimes windows 11 is not our friend
can you ping the printer from your pc?
from a different pc?
enable file and printer sharing.
AS A TEST turn off firewall.
WHAT ANTIVIRUS IS INSTALLED?
sometimes windows 11 is not our friend
can you ping the printer from your pc?
from a different pc?
Solventinkjet
DIY Printer Fixing Guide
Make sure the latest Mimaki driver is installed: https://mimaki.com/archives/032/MimakiDriver-v5.9.10-64bit.exe
For some reason Mimakis are finicky without the latest driver, even on ethernet.
For some reason Mimakis are finicky without the latest driver, even on ethernet.
sad_makaronchi
New Member
How many cartridge you use? 8 or 4? In instalation time I couldn't add jv300 to rip, because only 4 cartridge and 4 chip was installed in printer. I connected 4 more chips and could add printer to rip