• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Cap B Assembly for Mimaki JFX200-2513

Susan Stewart

New Member
I'm in need of one cap for the top of our ink bottles for our Mimaki JFX200-2513. We use LH-100 inks all except for our primer. The primer we're using is PR-200. The cap I need is the Cap B Assembly. The part # is MP-M014958. The only thing I have found online is sets of 8 caps, and they are quite expensive. Does anyone know of somewhere I can buy just one cap?

Screen Shot 2018-09-11 at 8.13.23 AM.png IMG_1905.jpg
 

Susan Stewart

New Member
I have a small crack in one of the caps on the gray section of the cap. It hasn't caused any problems yet, but I do think I should replace it before I get a leak.
 

MSSDon

New Member
I'm in need of one cap for the top of our ink bottles for our Mimaki JFX200-2513. We use LH-100 inks all except for our primer. The primer we're using is PR-200. The cap I need is the Cap B Assembly. The part # is MP-M014958. The only thing I have found online is sets of 8 caps, and they are quite expensive. Does anyone know of somewhere I can buy just one cap?

View attachment 136526 View attachment 136527
We only use the A caps and have have 2 complete sets of the B's. Maybe we can work out a trade? Call Ike Mumpower at (276)466-4751 and tell him Don suggested it on Signs101.
 
Top