n20capri
New Member
The scaling area must be set to 400% in order for it to actually cut at 100%. Every since I got it this has been the issue but when set to 400% it works fine so I rolled with it. Cutting from Illustrator with the Cut Master plug-in.
However, lately been trying to figure out print cut and noticed when I select "Use Registration" marks it re-scales everything back down to 100% which in reality is only 25%. Since everything is off it will not cut. It also won't let me scale up when using reg marks.
Just did a test - rescaled the artwork to 25% - printed but cut using the correct size art and don't you know it worked because everything lined up since it was all at "25%".
Problem is, I can't play these games of working with 2 docs, re-aligning reg marks etc etc every time...anyone have this issue or know how to fix it?
Much appreciated.
Mike
However, lately been trying to figure out print cut and noticed when I select "Use Registration" marks it re-scales everything back down to 100% which in reality is only 25%. Since everything is off it will not cut. It also won't let me scale up when using reg marks.
Just did a test - rescaled the artwork to 25% - printed but cut using the correct size art and don't you know it worked because everything lined up since it was all at "25%".
Problem is, I can't play these games of working with 2 docs, re-aligning reg marks etc etc every time...anyone have this issue or know how to fix it?
Much appreciated.
Mike