Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cj-500 need ribbon cable

Discussion in 'Roland' started by tiredcreations, Mar 30, 2010.

  1. tiredcreations

    tiredcreations Member

    Dec 3, 2008
    I knicked the 20 pin ribbon cable on my CJ 500. It goes from the motherboard to the operation panel. I think I repaired it, but I can't seem to get into the service mode. Not sure if this is the problem, since I haven't been in the service mode for years, but I would like to replace the cable to be sure.

    The cable reads "[SIZE=+0]FUJIKURA AWM 2896 80C VW-1[/SIZE]"
    I have found replacements by a google search, but they all seem to be around 13" - the one I need seems to be closer to 2ft long.
    Any ideas?

Share This Page