Cj-70 main board in CJ-500

[anozira02]

Does anyone knows if Cj-500 main board would work ok in the Cj-70 printer,, since they both cut and print and both 54" printers.. My Cj-70 main board got fried and it's the only printer I use for aqueous printing and have to get a bunch of posters out..thought I could swop out the board till I get my board back from repair..

 

[FrankW]

The parts are different, the printers too in several ways. But you would run into problems too if the parts would be the same: a lot of printer specific data and calibration is saved on the board.