-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
CJ500 Problem
- Thread starter oliver5528
- Start date
Replicator
New Member
First thing to try is a cleaning cycle and test print, and you may have to do it 6 to 10 times before you see good prints.
Next would be to do a physical head cleaning and then run through the steps above.
Good Luck !
Next would be to do a physical head cleaning and then run through the steps above.
Good Luck !
oliver5528
New Member
I will give it a try, Thanx
Off Topic : Converting To Eco-sol inks CJ-500
Hello Oliver,
Sorry for being off topic but there aren't many CJ-500 users left out there to ask questions to. I have a CJ-500 as well and have been contemplating converting to eco-sol inks. Can you lead me in the right direction, I've done a lot of researching but am unsure if this will damage the printer ultimately. Have you used your solvent system long? and would you say it's worth any extra work involved?
Hello Oliver,
Sorry for being off topic but there aren't many CJ-500 users left out there to ask questions to. I have a CJ-500 as well and have been contemplating converting to eco-sol inks. Can you lead me in the right direction, I've done a lot of researching but am unsure if this will damage the printer ultimately. Have you used your solvent system long? and would you say it's worth any extra work involved?
kustomsigns&designs
New Member
did you just convert it or has it been running fine then the banding started?
kustomsigns&designs
New Member
do a test print(nozzel check), how does it look?