Hey, I have a CJV150 and I mostly make dirt bike graphics. I started making graphics in 2019 so I'm still a bit of a newb, but I cannot get this thing to cut at a consistent depth. I was cutting some kits the other day and I had cut about 5-6 sheets and it was cutting pretty consistent, threw in another sheet to cut and it was hammering right through the backing paper. Nothing changed. Same material, same pressure, same heat. This is an issue I've been battling ever since I have started. Even on the same sheet it will cut through the backing paper randomly. Any suggestions? Or do I just need a standalone plotter, like Graphtec to be more consistent? I am using 21 mil material and a 30* blade.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
CJV150 plotter inconsistent
- Thread starter aboom
- Start date
Solventinkjet
DIY Printer Fixing Guide
Try a 56* blade. It's made for thicker materials. You will be able to cut with less force which should help your issue.