• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

cjv30-130 problem with red color

Z

zibby

New Member
Im just wondering if anyone run into this problem.
Im trying to print red but what im getting is orange.
Never had this problem before. Im trying to printig the same image that I did 3 weeks ago with the same settings with some red in it. This time around i'm getting orange instead of red. ( Raster Link Pro 5SG)
Please Help, any suggestions.
progress.gif
 
B

bloobird0

New Member
I would try the following to check if this is a software or a hardware problem.

In RasterLink, set the color replacement of your red area to 0/100/100/0 and watch at the result. If it appears red in the print, then this is a software problem (profile maybe?).
 
Z

zibby

New Member
0/100/100/0 was still printing orange.
Also I have tried to use different color profiles with the same result.
I don't get it.
 
You must log in or register to reply here.
Top