Joe Crumley
New Member
Un conventional Channel Letter Concept
Do we have anyone who has made channel letters using either PVC or Dibond for the letter walls?
A few months ago I happened on a software program for CNC's that would place bending groves in flat stock. The way it worked was to set the type and the program made the file. The material we used was Dibond and it became apparent the table surface must be very flat in order to maintain the critical depth. We gave it a try and it worked perfectly but the dept of cut with such thin material was critical. Perhaps PVC would be a better choice.
I'm ready for more experimentation and would appreciate a little input.
Joe Crumley
www.normansignco.com
Do we have anyone who has made channel letters using either PVC or Dibond for the letter walls?
A few months ago I happened on a software program for CNC's that would place bending groves in flat stock. The way it worked was to set the type and the program made the file. The material we used was Dibond and it became apparent the table surface must be very flat in order to maintain the critical depth. We gave it a try and it worked perfectly but the dept of cut with such thin material was critical. Perhaps PVC would be a better choice.
I'm ready for more experimentation and would appreciate a little input.
Joe Crumley
www.normansignco.com
