Color Management Issue for Mutoch VJ 1324

[EZ Ink]

My printer is printing magneta for red and the yellow is very poor. Black and Blue Colors are fine. Cleaned and nozzeled check a few times. Also set the software in color mangement too RGB 1998, it was orginally on sRGB IFC61966-21. Open for suggestions on what to try next. It was working the day before just fine. Thanks.

EZ Ink Promotions

 

[jcskikus]

How long have you had this printer? Leave those settings as they are as it sounds like you have a printhead issue. Always check the physical prior to changing software settings. Also, have you ever taken any courses on using Flexi software?

 

[EZ Ink]

Thanks
I shutdown the printer. An hour later went back and turn on. I next printed four yellow squares, maybe to clear the line. Cannot explain it, but it worked. Printed my client banner, no problems
Thanks

 

[Solventinkjet]

Thanks
I shutdown the printer. An hour later went back and turn on. I next printed four yellow squares, maybe to clear the line. Cannot explain it, but it worked. Printed my client banner, no problems
Thanks

That's a sign that your dampers need to be changed and/or there's an air leak somewhere in the line. Might be time for a maintenance.