Connecting Graphtect cutter

[Fbermudez]

I got a used Graptech FC-8600-100
But it does not have a usb port.
Can I connect it using ethernet port directly from my laptop?
I can seen to be able.to do it

 

[Goatshaver]

Should be able to.
Have you set a static IP address on the machine?

 

[Fbermudez]

Yes i have, I'm trying another cable just in case

 

[Fbermudez]

Should be able to.
Have you set a static IP address on the machine?

I figured it out. My ethernet control was disabled on the laptop.