Question Coro Real Estate Signs - How to Glue Two Together?

[caribmike]

We sell 18 x 24 and 24 x 24 corrugated plastic real estate signs everyday. But, I have a client who wants 24 x 24 signs that have two pieces of coro glued together so they slide over the odd metal stakes they use. I've seen these signs but don't know what type of glue one would use to fuse them together permanently. Any helpful tips or leads to sources for proper adhesives would be greatly appreciated.

 

[Boudica]

can you use banner tape?

 

[Gino]

Cor-X only lasts a short time, so you shouldn't need anything super permanent. Try a hot glue gun.

 

[chester215]

Maybe some VHB or similar double sided tape would work.
If you can grommet them, the grommets will help.

 

[Boudica]

Maybe some VHB or similar double sided tape would work.
If you can grommet them, the grommets will help.

VHB tape is expensive, but will hold forever.

 

[Notarealsignguy]

bubblegum

 

[Billct2]

cheapest double stick tape

 

[Johnny Best]

banner tape like mentioned

 

[Stacey K]

I've used carpet tape with good success on a few coro projects simply because I had some left over from installing carpet.

 

[2B]

take a 24" x 48" fold in half and then use 2 grommets in the corners where the 2 ends meet

 

[Stacey K]

Good thinking, though I want to say tape is cheaper than grommets, but I'm not sure on grommet pricing. Tape is all overhead imo... unless its VHB $1/ft kinda tape...

.06 per grommet the ones I bought on Amazon