Custom bridge and channel letter job! What cha think?

[Redz Signs Inc.]

heres a job we had completed last month thought id share . go ahead and critique it if you want . but before you say the bridge is to small thats all the sf that was alloud for that sign and the owner wanted it so bad we had to make it happen...

 

[Redz Signs Inc.]

final pic

 

[laserman70]

nice work.

 

[Gino]

​

 

[HulkSmash]

Very Cool.

 

[g&eprinting]

Very Nice.

What are you cutting the metal letters with cnc plasma, waterjet, by hand ???

 

[CheapVehicleWrap]

NICE! Bet that wasn't cheap.

 

[FS-Keith]

turned out nice. just curious why you used steel instead of alum for that bridge thing? what kind of benz do you have there

 

[GAC05]

Looks like a nice job on the production work.
The install looks off to me.
I don't know what constraints you were up against but the bridge looks like it is mounted to low in relation to the main letters. Shift it up so it aligns to the baseline of the lettering or even over the letters centered between the 2 windows.
I dunno, could just be the angle of the photo.


wayne k
guam usa

 

[Redz Signs Inc.]

im not sire why i used steel. it was what i had in the sheet form when i was rushed to do this job so i just used it .. it was a cnc plasma that cut it.. nope it wasent cheap at all.... and the bridge is centered to the letters its the angle that im at when i took the picture if your up on the overpass its perfict .... but thanks everyone it makes me feel warm and fuzzy inside and adds to my e-go .