Cut Contour

[Charlotte]

Hi

Is anyone able to advise on how to get the cut contour bang on please? It is pretty much always out, I trace the images in Coral draw and then send to raster link to print. So am I doing something wrong or is there a more precise way please.



Thanks in advance.

 

[Solventinkjet]

You need to run the print/cut alignments. What machine model are you working with?

 

[Charlotte]

You need to run the print/cut alignments. What machine model are you working with?

Hi

I have a Mimaki CJV-150-160

 

[Solventinkjet]

Click here to download the user manual if you don't have it yet.

Then go to page 100 to do the alignment if you aren't using registration marks. Page 101 for when using registrations marks.

The machine will basically print a bunch of magenta squares and then cut each one with a slightly different offset. You just choose the one that looks the best for each axis and input that into the machine. Hope that helps!

 

[Charlotte]

Click here to download the user manual if you don't have it yet.

Then go to page 100 to do the alignment if you aren't using registration marks. Page 101 for when using registrations marks.

The machine will basically print a bunch of magenta squares and then cut each one with a slightly different offset. You just choose the one that looks the best for each axis and input that into the machine. Hope that helps!

Thank you