cut contour

[signwizz]

my cut contour is off to one side on my sp300v i cannot remember where in the menu to adjust it and how to adjust it one way to the other .....
thanx shane

 

[ova]

I guess you're talking about the scan [left to right]

Go into the menu. Scroll til you come to cut calibration. You'll now be able to print/cut the graph and adjust the machine accordingly.

The steps are in the user manual. In mine it's section 4-8. Also many posts here if you do a search.

Dave

 

[bmendes]

Hi signwizz,
you will need to go to the print/cut adjustment menu. Once there scroll past test print
and settings and you should come to auto adjustment, once at this press enter to perform the auto alignment. The machine will print a little black square and read its printed position all automatically.
Also here is a link to a pdf for the manual adjustment: http://support.rolanddga.com/docs/D...s/Manuals and Guides/Service_Doc_PrintCut.pdf

regards
Brett