Flex_cut is the new option on Summas to perf cut all the way through the media and the backing in order to have a complete contour cut decal. It only works through Summas Winplot. There is no feature to do this this that I have found in Flexi. But I have only had the summa with Flex-Cut for a month...M*
Aaah yes, I remember now.
I use wasatch and it's a feature I can use if I upgrade to their latest version. From what I've been told about it, it's kind of useless. I can see it destroying sheets as once you cut through the backing the sheet loses all it's structural rigidity.
On a flatbed cutter it would be awesome, but on a cutter that has to move the sheet back and forth across the cutting plane it could cause some serious headaches. There's been times where I've forgotten to adjust the cutting pressure and had the machine cut through the backing
paper on a simple radius corner cut. It never turned out well. It can't be much of a time saver if you still have to rip the perfs apart. Between the set-up and tearing of the perfs I'll bet I can trim them out just as fast with a straight edge.