CutContour problem

[goinmxn]

I've been reading and have searched and have not found an answer. I am using Corel X4 with a a Roland sp300v. My problem is cutting. I have set a color to "CutContour" under spot colors and it still prints the contour. During searching I did find that I need to go to advanced eps settings and check the process box, but I cannot find the advanced eps menu? I need help finding this menu... dumb I know, but I can't find it.

Thanks
Steve

 

[threeputt]

Have you set the fill or the stroke to cutcontour?

 

[cajun312]

Your cut contour also has to be a hairline, anything else will print and not cut.

 

[Graphix Plus Ink]

Try this:

- .25 stroke
- Meter of 1
- Make sure the Cutcontour is on the top layer

 

[goinmxn]

Ok, thanks for the responses, it turns out I didn't use the hairline contour, now I have it cutting fine . ...

Thanks
Steve

 

[scarface]

i personally use .24 but .25 also works