JamesC
New Member
I am running Flexi 8.1v1 to cut and print printjobs. My printer is a mutoh 1304 valuejet and my plotter is a gerber Odyssey. When I take my print and begin cutting it, the plot lines begins to skew further and further from where it should be.
Ex.
I am printed this image which when cut would yield individual letters spelling brink of insanity
The b is the first letter cut and the line is int he right place, but by the I insanity my cut line is shifted to the right by and 1/8 of an inch. The shift isn't consistant though, it moves over more and more as the cut continues.
I've tried using the output compensation in the product manager. Both the gerber and the mutoh were not cutting and print true to scale, so I adjusted both. The problem still remains though. I maybe using the output compensation wrong, so that maybe the answer. I just need to know how to actually use it.
As anyone else run into this problem. If so how did you go about fixing it?
Ex.
I am printed this image which when cut would yield individual letters spelling brink of insanity
The b is the first letter cut and the line is int he right place, but by the I insanity my cut line is shifted to the right by and 1/8 of an inch. The shift isn't consistant though, it moves over more and more as the cut continues.
I've tried using the output compensation in the product manager. Both the gerber and the mutoh were not cutting and print true to scale, so I adjusted both. The problem still remains though. I maybe using the output compensation wrong, so that maybe the answer. I just need to know how to actually use it.
As anyone else run into this problem. If so how did you go about fixing it?