CWT or Foster cutter?

[Dukenukem117]

Im looking for a linear cutter of at least 64". We cut a lot of soft material like textiles and Foster mistakenly sold us a table edge rotary cutter that was awful. They later said that it was not the right cutter and we should have bought a Javelin. Our local supply shop also sells CWT cutters but I have no way of demoing one.

 

[Ldireprophil]

Im looking for a linear cutter of at least 64". We cut a lot of soft material like textiles and Foster mistakenly sold us a table edge rotary cutter that was awful. They later said that it was not the right cutter and we should have bought a Javelin. Our local supply shop also sells CWT cutters but I have no way of demoing one.

Grab a cheap flight to Orlando April 2-5 for the ISA show, you can spend all day at the CWT booth if you want.

 

[Dukenukem117]

I ordered a Cuttarri 64" to evaluate before getting the 83" as well. Too bad it doesn't get larger.

 

[Dukenukem117]

Unfortunately the Cuttarri cuts about 2.5mm offset from the ruler line, is this normal with straight cutters?

 

[Christian @ 2CT Media]

Unfortunately the Cuttarri cuts about 2.5mm offset from the ruler line, is this normal with straight cutters?

Most yes, some higher end brands have laser lines or cut true edge with a ceramic sharpening edge.

 

[Dukenukem117]

Most yes, some higher end brands have laser lines or cut true edge with a ceramic sharpening edge.

What brands are these?