• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Default job properties in Production Manager PRESET

I

IsItFasst

New Member
Okay for the life of me I can not figure out how to get my default "Preset" in production manager back. My last preference manager I loaded must have not had this part saved so now its preset defaults to a setting I don't use. I can still get to it by pulling down on the menu and selecting it but for some reason it always defaults to a different setting. I had renamed the presets to my own names so I know what to use but I just can't see where I am supposed to get the PM to default to my one preset I want to use. :banghead:
 
I

IsItFasst

New Member
Not sure how I missed this since I just did it 6 months ago but here's a refresher if you lose your preset:

1. Open Production Manager
2. select the printer setup
3. right click on the setup
4. Select Default job properties
5. go to the 3rd tab (Color Management tab)
6. on the top of this tab there is preset drop down menu.
7. pick the preset you want to set as default from the
preset drop down menu.
8. after the preset was selected, hit on the Apply
button.

Flexi support forum helped me out on this one.
 
J

Jburns

New Member
Thank you for the info! I noted and saved! With all the options for configuration this is nice to have.
 
You must log in or register to reply here.
Top