Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need Help Display panel

Discussion in 'Digital Printing' started by CHISCOTT1, Apr 14, 2019.

  1. CHISCOTT1

    CHISCOTT1 New Member

    2
    0
    1
    Feb 3, 2016
    Tempe, AZ
    Hey guys/gals, need your help. We accidentally spilled some flushing/cleaning fluid onto
    our display panel to our Mimaki JV400-160 SUV printer. It basically fused the buttons.
    We took the panel off and cleaned the buttons up to get it functional again, but we're
    going to need a new or a good used panel down the road.
    My question is, does anyone know were we can get a good used panel? Is there
    a business in the US that parts out printers?
    Thanks
    Scott
     
  2. Jburns

    Jburns Active Member

    529
    78
    28
    Jan 19, 2009
    Denver
  3. netsol

    netsol Member

    234
    19
    18
    Apr 26, 2016
    spotswood, nj
    i have done similar repairs, after an acetone spill for customers.
    if the display panel is NOT a toch screen, use a sylvania headlight restoraation kit

    https://www.autozone.com/wash-clean...ation-kit-with-uv-block-clear-coat/272381_0_0

    get it from amazon or at an autozone

    i would not use any other brand

    carefully try a tiny drop of the spersy cleaining fluid
    i think i would skip to the polishing compound (last step)

    again, be careful, try a tiny spot at rdge of panel, all displays are not created equal
     
Loading...

Share This Page

 


Loading...