Double cut on step and repeat in flexi

[cmykburnley]

Hi Everyone

Im trying to cut A4 pieces using my flat bed cutter. Each A4 is white edge so no need for a bleed. Normally id add a cut contour then step and repeat with a space.

As its white there is no need for a space. So I step and repeat with 0mm. Is there a way to merge the cutlines so it doesnt cut twice along the same path?Ive tried every combine tool and nothing seems to work.

Thanks all in advance!

 

[FrankW]

There is an option in the cut dialog to avoid cutting double lines. Unfortunately here is late evening, but I can check it tomorrow.

 

[cmykburnley]

There is an option in the cut dialog to avoid cutting double lines. Unfortunately here is late evening, but I can check it tomorrow.

Hi Frank, if you could that would be amazing my friend

 

[gabagoo]

There is an option in the cut dialog to avoid cutting double lines. Unfortunately here is late evening, but I can check it tomorrow.

I need to see this too!!

 

[FrankW]

Try "eliminate line segment overlap" in the "Advanced"-Tab of the Print/Cut-Dialog (see attached screendump).

This is from Flexi 21. Should work (not absolutely shure).

 

[cmykburnley]

I shall try that, thank you!

Be awesome if it could actually be done in flexi itself at the point of export. Rather than running into the rip itself