Doublesided Laminate

[PushProductions]

On that particular one im not doing a white backer. Just trying to get info on both styles

 

[PushProductions]

Again, thanks for all the info! Here is the finished product!

 

[dlndesign]

Looks great, did you end up using the 3M clear, reverse for those prints? What machine did you print them on?

http://www.cmykthis.com

 

[PushProductions]

We actually used avery dol 1080. It was optically clear, and we had it in stock. We tested a couple print and the ink held well on them so we went with it. Printed on a Roland sp-540v.

 

[pjfmeister]

Nice job...I like the standoffs selected

 

[niksagkram]

We actually used avery dol 1080. It was optically clear, and we had it in stock. We tested a couple print and the ink held well on them so we went with it. Printed on a Roland sp-540v.

So, you actually printed on the laminate??

 

[PushProductions]

So, you actually printed on the laminate??

Yes, we reversed the image and printed onto the laminate. Then laminated over the image (with the same avery laminate), then mounted to the back of the acylic wet. Worked perfectly and was really easy actually.

 

[PushProductions]

I print reverse on optical clear, then lam with the same. not a big deal.

Do you apply to acylic wet or dry?

 

[Mosh]

I do it dry, unless it is great big.