Dry erase calendar

[Commando]

Alright folks, I was asked to make dry erase boards for a fundraiser. I found the ez erase sheeting to print on. Any suggestions on what to stick these on to make lightweight dry erase boards? Any help would be greatly appreciated.

 

[jfiscus]

sintra or foamcore should both work fine for lightweight

 

[Billct2]

We do these with dry erase laminate, never tried printing on any of the dry erase films, except in the Edge.
I would use coro or PVC, never liked foamcore, gets damaged too easily

 

[Gino]

We do these with dry erase laminate, never tried printing on any of the dry erase films, except in the Edge.
I would use coro or PVC, never liked foamcore, gets damaged too easily

Same here....... we print to a substrate and then lam with dry erase. For most printers, they won't adhere well to the dry erase..... guess why.

Also, same here with the foamboard. You just hafta look at it..... and it dimples.

 

[T_K]

We applied the dry erase laminate to customer supplied painted boards. It was a bit tricky to get them to stick well enough that we were happy, but after the adhesive set it was fine.

 

[signed off]

we print, laminate with dry erase as well BUT put it on something hard, corplast, cintra because if you put it on styrene they may be tempted to roll it up to transport and it will fail. Learned the hard way. You can not roll up anything laminated with dry erase