DX4 cable / fuse...?

[SignJose]

Hello everyone
Y & M stopped printing cause my printhead cable shorted touching the metal bar (see red arrow). I pulled damaged cable out. Obviously it's a FUSE.
My questions:
1. Is it safe to turn the printer ON with 1 cable missing ?
2. Should i try switching the cable from Group C that i knoww orks, to make sure my printheads are OK ?
3. Where are those FUSES on the SC-540 main board ???

Thanks

gene

 

[Robert M]

Fuse

I would replace the fuse and the cable, the head my be ok. I can send you the tech manual but it may no show the fuse because Roland would rather sell you a rebuilt board. They are called F1, F2, etc. Very small maybe 1/8 x 1/4 inch
I have them if you need them, they are not on the site yet, call 303-733-6671 to order
www.solventinkjet.com