E076 Err Pre heat VJ-1204

[tint_zone]

i recently bought new mainboard powerboard and someother stuff FOR MY VJ-1204 hoping it would have helped my machine, but im still getting an E076 Err pre heat after the machine is powered on for about a minute. Also it doesnt read none of my inks anymore, i tried a new set also and same thing, also the platen and the dryer gets really really hot after power on, im clueless as to whats causing this any ideas? im loosing my mind here.

 

[timson_ads]

heater junction board, and the three cr long cables must be replaced

 

[tint_zone]

heater junction board, and the three cr long cables must be replaced

You mean replace the Heater junction board? of the cable from the board?

 

[tint_zone]

Problem Solved

It was the print head got fried, replaced it and now its working. Thanks