edge fx stop printing half way on 3rd color pass

[artofacks1]

I was printing 30 decals today and after the edge printed the white, than the yellow, halfway through the black the edge fx errored and stop printing.

Is there a way to register the beginning of the print and start it all over? Making sure it prints and uses the registration? Or if this error happens the prints are pretty much ruined? And I have to start all over?

 

[artofacks1]

 

[artofacks1]

Notice how it stopped on the black. I was hoping I could register the printer and just print right on top with black.

 

[CanuckSigns]

I don't have an fx, but when I print multiple coloured, I make sure to hit the he button on the printer before sending the job so if this happens I can always re register.

 

[jfiscus]

If you hit "home" before you started printing then you can change the color order in the GSPplot.
Go back to the home and just let it send the colors starting with the black and whichever were left to still print.
The black should just lay down a double-coat of black on its areas, but that should be fine as black is an opaque color.

 

[artofacks1]

D'oh! I already took the job off and turned if the edge. For future projects now I know.

 

[jfiscus]

D'oh! I already took the job off and turned if the edge. For future projects now I know.

As long as you hit home originally it'll still be fine.