Edge printing Oralite 5650RA?

[SellersSign&Design]

I was about to buy some white reflective today for a job I have coming up that involves lettering several wreckers and big trucks. It will be a multi color job printed using my Edge. I normally use the 5600 fleet reflective, but I noticed 5650RA is available in 15" punched. Has anyone tried printing on this with an Edge? If so, how did it work and what are your thoughts on this material?

 

[SellersSign&Design]

Anyone??? I would like to hear from anyone that uses this reflective even if they don't print on it with an Edge. How much easier is it to install? Would you recommend it over the standard Oralite reflective?

 

[artofacks1]

I used the refactac from graphics marketing system and it's pretty cool

 

[reQ]

Anyone??? I would like to hear from anyone that uses this reflective even if they don't print on it with an Edge. How much easier is it to install? Would you recommend it over the standard Oralite reflective?

Did Fire Dept. truck 2 months ago. Very easy to work with, considering its a reflective material.

 

[Mike Paul]

The R/A works great, especially when applying large prints.

 

[SellersSign&Design]

Unfortunately I don't think it will work for me. After looking around and finding a technical data sheet on it from Orafol, they do not list thermal as an approved printing process for this material. I guess that's one more reason I need a new latex printer!

 

[artofacks1]

Unfortunately I don't think it will work for me. After looking around and finding a technical data sheet on it from Orafol, they do not list thermal as an approved printing process for this material. I guess that's one more reason I need a new latex printer!

Try the 3m or refactac you can print on it.

 

[Browner]

Pricey, but try 3M 680CR.