enviromental match

[rushworks graphics]

how do you do the enviromental match? i've read a few times now about once you print, let to dry/out gas and laminate, you then do an "enviromental match"................we've never done that. so, how do you do it?

 

[Mike Paul]

Push the Menu button then the arrow button until it comes up.

 

[Double Diamond]

Under menu... arrow down or up till it sais enviro match. Hit enter. It runs the y axis. Takes less than a minute. It's good for a print, lam then cut job. I think it calibrates itself at it's current condition like temp and such and compinsates for it. Hope it helps. J

 

[rushworks graphics]

ah.........right! got ya! thanks guys!

 

[rushworks graphics]

oh i forgot to ask.............do you load in the prints with lam,.........then do the enviro match? or.......before you load in your prints?

 

[JRSdecals]

If you have a VP540, i don't think you will have that option in the menu. With that printer Roland started making the machine do it automatically everytime it reads the media width.

Jeremy

 

[rushworks graphics]

oh right! i haven't checked on the menu yet.

 

[Zazzess]

what is an environmental match ? :/

 

[rushworks graphics]

when your printer takes the enviroment it is in, for example the room it is in and adjusts for any temp/humidity changes etc so the material you have reloaded into your printer is cut correctly.....................i think i explained that ok??!!!?!

 

[Zazzess]

when your printer takes the enviroment it is in, for example the room it is in and adjusts for any temp/humidity changes etc so the material you have reloaded into your printer is cut correctly.....................i think i explained that ok??!!!?!

I understand thank you

 

[Roland]

This function is made automatically on VP-540 every time the setup sheet is made. The printer calibrates itself (encoder setup etc...) considering the external factors : humidity, temperature, light (I guess) a.s.o.

 

[rushworks graphics]

This function is made automatically on VP-540 every time the setup sheet is made. The printer calibrates itself (encoder setup etc...) considering the external factors : humidity, temperature, light (I guess) a.s.o.

thanks..........appreciate the info