Error 07 P-head init

[grafigo]

2 weeks ago my printer started occasionally beeping during the printing and showing this message on display: "Error 07 - P-head init".

Last week beeping would be pretty constant during the printing, but it did not influence the print.

This morning I clicked the TEST DRAW button and the P-head carriage moved to the right side (to start printing). The material just started crawling and nothing happened. Machine did not responded to a single button (even POWER button) so i switched her off on master switch.

After that i turned it on and now the "Error 07 - P-head init" is permanent and i can't do anything.

Any idea how to try to solve this?

 

[Neil]

According to the manual:

An error was detected in the head connection.

(Abnormal temperature was detected.)

I guess you could try checking the connections, make sure there's no ink on the FFC cable connectors going into the head.

 

[grafigo]

Thank you Neil for the idea what to look for.

There was ink on the connectors going into the head and in to the connectors in the head. I cleaned the cables, end of the connectors and even the connectors in the head, as much as i could, but the error is still present.

Do i need to "clear" the error log, like in the car?