-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Error # 29
- Thread starter Celine
- Start date
theskipman_98
New Member
http://www.gspinc.com/downloads/PDF/fastfacts/literature/enVision_Users_Manual.pdf
Page 58, something is obstructing or preventing the head from moving to the home position. Usually we get axis overloads when the vinyl has jumper "track" and binds on the blade holder. Another thing may be something stuck in the track above the head, such as a vinyl "chad" (piece of the knock out when the make the holes for the tractor feed)
Hope this helps
Page 58, something is obstructing or preventing the head from moving to the home position. Usually we get axis overloads when the vinyl has jumper "track" and binds on the blade holder. Another thing may be something stuck in the track above the head, such as a vinyl "chad" (piece of the knock out when the make the holes for the tractor feed)
Hope this helps