-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
error code 45.1:03 anyone,,,, anyone?
- Thread starter ProWraps
- Start date
Jack Knight1979
New Member
seems like walker and texas ranger have been dishing out a lot of problems for you.
what's your opinion on these machines?
what's your opinion on these machines?
ProWraps
New Member
SUHHHHHHLLLLOOOOWWWWWWWWWWWWWWW!
did i mention suh-low?
everything about them takes forever.
starting up.
heating up.
ripping.
printing.
you name it. they are the slowest thing i have ever experienced.
i can say one thing for my mutohs. you want to print something fast. you throw in media, hit print, and its done and done.
the hps print beautifully, but you WILL pay dearly in time/speed for it.
so far i have just over 7000 sqft of media through them with another 16,000 to go on this job. we will see how it goes.
i think i was initially off on my sq/ft print calculation though.
i estimated 80 sq/ft hour.
now that i have much more data to go off, im getting a sq/ft per hour of 102.118
much better than 80. doesnt seem like it, but when you are running 23,000 sq/ft of media, that extra 22 sq/ft per makes a difference.
this is at a 10 pass bidi high ink setting. this setting allows you to get the TRUE rich color of the file. any lower passes/ink settings do NOT produce true to file color.
oh and GB2, just for you im going to keep my avy around a few more monfs.
did i mention suh-low?
everything about them takes forever.
starting up.
heating up.
ripping.
printing.
you name it. they are the slowest thing i have ever experienced.
i can say one thing for my mutohs. you want to print something fast. you throw in media, hit print, and its done and done.
the hps print beautifully, but you WILL pay dearly in time/speed for it.
so far i have just over 7000 sqft of media through them with another 16,000 to go on this job. we will see how it goes.
i think i was initially off on my sq/ft print calculation though.
i estimated 80 sq/ft hour.
now that i have much more data to go off, im getting a sq/ft per hour of 102.118
much better than 80. doesnt seem like it, but when you are running 23,000 sq/ft of media, that extra 22 sq/ft per makes a difference.
this is at a 10 pass bidi high ink setting. this setting allows you to get the TRUE rich color of the file. any lower passes/ink settings do NOT produce true to file color.
oh and GB2, just for you im going to keep my avy around a few more monfs.
ProWraps
New Member
heres another quandary fer ya.
how come two printers side by side, printing the exact same thing at the same speed, and the same amount would have one printer have a cleaning kit that is being used 2000 times faster than the other?
one kit at 1% used, the other at 20%. same print, same speed, same amount. hmmm.
how come two printers side by side, printing the exact same thing at the same speed, and the same amount would have one printer have a cleaning kit that is being used 2000 times faster than the other?
one kit at 1% used, the other at 20%. same print, same speed, same amount. hmmm.
Typestries
New Member
The one using the kit faster has extra cleanings enabled. It's cleaning the head by spitting on the blotter each head pass. Turn it off in image quality menu. Huge waste, err profit center for hp
Custom_Grafx
New Member
I hope it doesn't do what laser cutting PVC does... release chlorine gas.
Dave Rowland
New Member
media stinks agreed... ink is fine....
no pleasing this guy lol
With regards cleaning cart... im average 1-2% per day basically.
no pleasing this guy lol
With regards cleaning cart... im average 1-2% per day basically.
