F Outdoor II streaking on print

[Hummer69]

Here is the problem I'm having. The black and Magenta are streaking. This was printed on the low head height and I also tried it on the Middle head height with the same result. All heads are lint free. The streaking doesn't happen during a nozzle check. Pictures are blurry because of my cell phone camera.
Thanks for any help.

 

[The Sign Dude]

you have lint or something on your heads. use a cleaning swab and some denatured alcohol and clean it off, do a head cleaning and then try it again.

 

[Replicator]

Is it possible the marks are being created by rollers ?

 

[The Sign Dude]

POLICY ENFORCEMENT MOD ....What the hell is that??
Sorry to be a

 

[Graphics2u]

Check the entire underside of the printhead carriage and make sure it's clean. Is your material buckling due to too much heat?

 

[Hummer69]

The print heads are clean and no fuzz or lint. I've set heat really low and still have the same result.

 

[Hummer69]

Thanks for the help. Outer part of the carriage had some fuzz on it causing the streaking. I was too focused on keeping the print heads clean and missed it.