• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

falcon outdoor 48 crazy

L

laserman70

New Member
beginning first 2 inches are not printing all the color.
Any ideas?
Thanks
 

Attachments

  • 2011-08-15 12.40.35.jpg
    2011-08-15 12.40.35.jpg
    65.1 KB · Views: 88
Flame

Flame

New Member
Sounds like possible cross contamination, or capping station not doing it's job properly. I'd soak the heads, do a couple really good cleanings, see if it helps. If not, next step would be replacing the pads on the capping station or the minimum, take them out and put them back in, making sure they are tucked in tightly and securely. If still bad, look at all the lines around the capping station and make sure none are nicked at all, and if not, then maybe consider a new capping station pump. Pretty cheap and they're known to not last very long.
 
You must log in or register to reply here.
Top