• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Falcon outdoor ii Service Manual

intlplayboy

New Member
Greetings all,
I have been reading through this forum for some time and there is a TON of good information in here. The knowledge that is here is priceless. I am however at a loss I have a falcon outdoor ii that I bought a while back it was working left in standby overnight then the next morning it was dead suspect a power bump or something. I have checked fuses and such but no luck. When it is plugged in you hear a real high pitched noise (suspect it's a cap on the power supply board). The back light for the LED screen comes on but nothing else after a few min. the 2 fans above the clear lid come on but that's it. I tried checking voltages and I know I am missing a few however not having a manual I don't know what they are suppose to be. Does anyone have any ideas or maybe a service manual and or schematics they would care to share with me?

Thanks :U Rock:
 

letterman7

New Member
PM me with your email. I can send you the manual in a .pdf . It's for a Falcon Jr., but from what I understand they are basically the same except for the print width.
 

intlplayboy

New Member
Thanks for the manual I still think I need something that is for my system the book is close and at least I know what voltages I am looking for now... just have to figure out what pins it's going to be on... Anyone have any information it would be greatly appreciated..

thanks
 

tiger1970

New Member
service manual falcon outdor

PM me with your email. I can send you the manual in a .pdf . It's for a Falcon Jr., but from what I understand they are basically the same except for the print width.


Excuse me, do you have still the manual service to falcon outdoor? can you e-mail it to me?

Thanks
 
Top