Does anyone have any experience with the FCX2000? We would mainly be using it to cut motocross graphics that are 21 mil. The vinyl we print on is 30" Wide so the 36" size would work perfect. I just wasn't sure if it was a decent cutter or if you are just better off going with something larger or another brand.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
FCX2000
- Thread starter yamaha581
- Start date
Pauly
Printrade.com.au
It'll probably do what you need it to do. I'd suggest get a demo of the machine with the same stock you plan to use.
cmoist
New Member
We have two of them. They will cut substance 21mil (6+15mil) fine. We cut 30mil magnet with it every day. You wont get the speed out of it that you could from Summa flatbeds, but they are a fraction of the cost.
The cutting master 4 software is simple to use. As with any flatbed, the vacuum pump is noisy. It can be placed in a separate room if available.
The cutting master 4 software is simple to use. As with any flatbed, the vacuum pump is noisy. It can be placed in a separate room if available.