filler sensor location on my roland truvis sg300

[signguy74]

I have the new sensor and a service manual but still having trouble on pin pointing its location.
Any help would be great

 

[damonCA21]

Have you looked at the exploded diagrams to see if you can find it on there? If not look where the wiring to the sensor comes from ( normally the servo board ) and then follow this to find out where the sensor is. I'm not familiar with the truvis, but it is most likely around the print dock area

 

[Zoogee World]

Which filler sensor is it that you need to replace? I just had to replace a couple last week, one on the magenta and then the cleaning tray.

 

[cornholio]

The filler sensors are located in front of the printheads on the carriage. Very easy to replace.

 

[Zoogee World]

The filler sensors are located in front of the printheads on the carriage. Very easy to replace.

There is also one behind the cleaning tray. I think there might be another one somewhere, but not certain, as those were the only ones I've changed.