parkedcar
New Member
I finally got the new wrap completed.
Feels good to have it all wrapped up and i should be turning heads once again.
Install took 20 hours by myself for the most part. My fiance helped with laying the panels down and she did do some squeegeeing too. Went pretty smooth for the most part, and i got quicker as i went on. This was my first full wrap since last spring.
Thanks to Chris at AZ Pro Signs for the print!
Material is IJ180cV2 with 8518. I used primer 94 on the edges and in some of the deeper recesses. Its 100% seamless, having one panel each for the bed, each door, and fender. I removed all handles, mirrors and lights which makes for an easier and much cleaner looking install.
It was designed at 50% 300 dpi, and the print is crystal clear from even a foot away. The blue is BRIGHT and the pics dont do it justice.
On with the pics!
Feels good to have it all wrapped up and i should be turning heads once again.
Install took 20 hours by myself for the most part. My fiance helped with laying the panels down and she did do some squeegeeing too. Went pretty smooth for the most part, and i got quicker as i went on. This was my first full wrap since last spring.
Thanks to Chris at AZ Pro Signs for the print!
Material is IJ180cV2 with 8518. I used primer 94 on the edges and in some of the deeper recesses. Its 100% seamless, having one panel each for the bed, each door, and fender. I removed all handles, mirrors and lights which makes for an easier and much cleaner looking install.
It was designed at 50% 300 dpi, and the print is crystal clear from even a foot away. The blue is BRIGHT and the pics dont do it justice.
On with the pics!
Nice job Mike---
